Hi folks, looking at the thread it appears that a handful of us are having problems from page 49.
Here's what I get when I issue the show ip route ospf from R5 notice that the routes to VLAN146 & R6's loopback are being learned from both ABR's. I just need a little explanation/guidance the work book only shows that R5 is only learning both routes from R1.


R5#sh ip route ospf
155.1.0.0/16 is variably subnetted, 6 subnets, 2 masks
O IA 155.1.146.0/24 [110/782] via 155.1.0.4, 00:22:47, Serial1/0
[110/782] via 155.1.0.1, 00:22:37, Serial1/0
O IA 155.1.6.6/32 [110/783] via 155.1.0.4, 00:22:47, Serial1/0
[110/783] via 155.1.0.1, 00:22:37, Serial1/0
O IA 155.1.4.4/32 [110/782] via 155.1.0.4, 00:22:47, Serial1/0
O IA 155.1.1.1/32 [110/782] via 155.1.0.1, 00:22:37, Serial1/0
R5#


Thanks in advanced I appreicate it.

jmcpobre